TASCAM US-428 ON LINUX
======================

* Install `alsa-firmware`

        # pacman -S alsa-firmware

* Get `alsa-tools`

        $ wget ftp://ftp.alsa-project.org/pub/tools/alsa-tools-1.0.22.tar.bz2

* Install `usx2yloader`

        $ tar xvf alsa-tools-1.0.22.tar.bz2
        $ cd alsa-tools-1.0.22/usx2yloader
        $ ./configure --help
        $ ./configure --prefix=/usr
        $ make
        $ sudo make install

* Install `us428control`

        $ cd ../us428control
        $ ./configure --help
        $ ./configure --prefix=/usr
        $ make
        $ sudo make install

* Install [`fxload`](http://aur.archlinux.org/packages.php?ID=2897) from AUR

* Install [`udev-tascam-usx2y`](http://aur.archlinux.org/packages.php?ID=14648) from AUR

* Check the udev rules

        # vi /etc/udev/rules.d/55-tascam-usx2y.rules

  and edit accordingly. (For me, remove '-m mixxx')

* Turn it on and rock out

References
----------

* [udev rules](http://www.ctaf.free.fr/dokuwiki/doku.php?id=archlinux#us428)
* [alsa page on usx2y](http://www.alsa-project.org/main/index.php/Matrix:Module-usb-usx2y)